Bolero/ Nova/ Naida hearing aids
The new hearing aids we currently fit are bluetooth-compatible.
We have a wide range of bluetooth hearing aid models such as Bolero
series, Nova Ms and Naida series. All of these models have the same
controls which will be discussed on this page. To see which model
you have, please check either your battery card, individual care
plan or your hearing aids.
Operating your hearing aids
Turning your hearing aids on/off
To turn the hearing aid on, close the battery door. To turn the
hearing aid off, open the battery door.
Left & right hearing aid markings
There is a red or blue marking on the back of the hearing aid.
Red marking is for the right hearing aid and blue marking is for
the left hearing aid.
On your earpiece, there will also be a marking in blue or red.
Please ensure the colour of the marking on your earpiece matches
the colour of the marking on your hearing aid.
Volume control and programs
Depending on how your audiologist has set up your hearing aids,
you may have a volume control and/or programs added.
You should see two buttons on your hearing aids. A quick press
of the top button turns the volume up. A quick press of the bottom
button (button closest to the battery door) turns the volume
down.
You might have programs on your hearing aids if the audiologist
has added them. To change the program, hold down the button (for at
least 3 seconds or longer) until you hear a beep. One beep is
program 1, two beeps is program 2 and three beeps is program 3. If
programs have been added, your audiologist would have advised you
on what programs are on your hearing aids. Many patients opt to not
have any programs and only have a volume control, as the hearing
aids can automatically adjust its settings to optimise the sound
quality in its environments. If you would like a
telecoil loop program added, please contact the Audiology
department.
If you opted to keep things simple at your fitting appointment,
your hearing aid may have been set to fully automatic mode, which
does not require you to press any buttons.
Changing the battery
To change the battery, lift the old battery out of the battery
door. Then remove the sticker off the new battery and place the new
battery into the battery door vertically with the flat part (i.e.
"+" symbol) facing up.
BATTERY SAFETY
ALERT - it is dangerous if a battery is
swallowed accidentally and needs urgent support from A&E.
Please keep and store batteries safely. Contact: patientsafety.enquiries@nhs.net.
(National Patient Safety Alert:
NatPSA/2019/003/NHSPS)
Useful instructional videos
1. How to insert the hearing aid for:
An open fit hearing aid
A moulded hearing aid
2. How to clean the hearing aid for:
An open fit hearing aid
A moulded hearing aid
Connecting to bluetooth devices
1. Click on Settings icon
2. Click on Bluetooth tab
3. Turn hearing aids off and on again (this puts them into a
pairing mode for 3 minutes)
4. On phone, select "pair new device" - some phones will
automatically start searching for new devices
5. When the hearing aids are found, it will only connect to one
of them, usually the right, as it streams over to the other side -
the name of the device should include the name of the hearing aid
(it will not be a random string of numbers and letters)
6. Click on the device - a message will appear asking if you
wish to pair the hearing aid, click "pair"
How to connect to your iPhone video
How to connect to your Android video
Phone calls
How to connect to the 'MyPhonak' app
- Install the app from the App Store .
- On your smartphone open the app and click "Next".
- Walk through the "welcome screens".
- Read and "Accept" the Privacy Notice.
- If you like, you can share usage data with us. Find more
details in the Privacy Notice of the app.
- Make sure that Bluetooth is enabled on your iPhone.
- Reboot the hearings aids by following the instructions in the
app.
- Tap "Continue" to search for the hearing aids.
- The app will start searching for the Phonak hearing aids.
- Once they are found, tap "Select."
- Allow some time for the app to connect to both hearing
aids and confirm the action for each hearing aid in the
dialog.
- After the hearing aids are connected tap "Ok".
- Once completed you'll see a confirmation screen and will
be automatically redirected to the main screen.
MyPhonak app video
Please note that you will not be able to see your battery levels
in the app on these hearing aids as they are non-rechargeable. Also
you must have internet connection the first time your hearing aids
are paired to the app. If you have an audiology appointment and the
clinician changes the settings on your hearing aids, your custom
programs may be deleted on the app.
If you have lost pairings or having problems with App:
• Delete the app
• Go into the Bluetooth settings menu and delete all pairings to
the hearing aids
• Restart the phone
• Open the Bluetooth settings menu and pair to the hearing aids
(this will just pair to one of the aids) but it establishes the
connection we need for call streaming
• Then reinstall the app
• Restart both hearing aids and pair both in the app
If you still have issues, please check the Support Section of
the Phonak website: https://www.phonak.com/en-uk/support
Additional Resources
Bluetooth Guide for Phonak hearing aids
Nova M/ Bolero M70-M Full User Guide
Naida M70-SP Full User Guide
Naida P70-UP Full User Guide
Nova/ Naida Simple Slimtube Guide
Nova/ Naida Simple Earmould Guide
